Inside Mount Instructions - Width

• Use a steel measuring tape and measure to the nearest 1/8”.
• Measure the exact width (left to right) of the inside edge of the window frame in 3 places (top, middle, bottom).
• Take the smallest of the 3 measurements.
• This is the width measurement you will order; width is always the first measurement recorded.
• Your window must have a minimum depth of 7/8” to 1 1/8" for the slat size.
• The manufacturer will deduct 1/2" from the width, to ensure proper fit.

Inside Mount Instructions - Height

• Measure the exact height (top to bottom) from the top inside edge down to the window sill in 3 places.
• Take the longest of the 3 measurements.
• This is the height measurement you will order; height is always the second measurement recorded.

* Do not transpose width and height measurements. *

* Finished blinds size may vary +/- 1/8”. *

Outside Mount Instructions - Width

• Measure the exact width (left to right) of the window frame or how wide you would like the blind to be.
• Make sure to measure wide enough to cover the entire window and provide for minimum light gap; we recommend adding 6” to 8”. Example: if the window opening is 36", by ordering 40" it will provide 2" coverage on each side of the window.
• This is the width measurement you will order; width is always the first measurement recorded.
• The valance will be about 2” wider, than the width ordered, for valance returns.
• If you specify outside mount, the manufacturer will not take any additional deductions.

Outside Mount Instructions - Height

• Measure the exact height (top to bottom) from the top inside edge down to the window sill in 3 places.
• Take the longest of the 3 measurements.
• We recommend adding 4” to this number to ensure optimum light control and privacy.
• Please be aware your height measurement will always include the headrail. Example: if the height ordered is 50” this will be the height including the headrail (from the very top of the headrail to the bottom rail).
• You will mount the headrail on, above or beyond the window frame.
• Some windows have decorative trim which may interfere with mounting; it's important to add to your measurement to mount above the trim. Remember to request extension brackets.

* Do not transpose width and height measurements. *

* Finished blind size may vary +/- 1/8”. *