Inside Mount Instructions - Width

• Use a steel measuring tape and measure to the nearest 1/8”.
• Measure the exact width (left to right) of the inside edge of the window frame in 3 places (top, middle, bottom).
• Take the smallest of the 3 measurements.
• This is the width measurement you will order; width is always the first measurement recorded.
• Your window depth must be 2 ¾" to 3 ½", depending on the number of panels per track (see chart below).
• The manufacturer will deduct up to 3/8” total, from the width, to ensure proper fit.

Inside Mount Instructions - Height

• Measure the exact height (top to bottom) from the top inside edge down to the window sill in 3 places.
• Take the shortest of the 3 measurements.
• This is the height measurement you will order; height is always the second measurement recorded.
• We recommend you subtract ¾" for carpet clearance.
• The manufacturer will take a ¼" deduction to your height.

* Do not transpose width and height measurements. *

* Finished blind size may vary +/- 1/8”. *

Outside Mount Instructions - Width

• Measure the exact width (left to right) of the window frame or how wide you would like the blind to be.
• To go above and beyond the wood frame for panel tracks, add 6” to 8” to your width measurement.
• Make sure to measure wide enough to cover the entire window and provide for minimum light gap. Adding 6” to 8” is recommended. Example: if the window opening is 70", by ordering 76", it will provide 3" coverage on each side of the window.
• This is the width measurement you will order; width is always the first measurement recorded.
• If you specify outside mount, the manufacturer will not take any additional deductions.

Outside Mount Instructions - Height

• Measure the height you would like the blind to be by measuring top to bottom.
• We recommend adding 2 ½" to your height to allow room for mounting brackets above your opening.
• Please be aware your height measurement will always include the headrail. Example: if the height ordered is 80” this will be the height including the headrail (from the very top of the headrail to the bottom rail).

* Do not transpose width and height measurements. *

* Finished blind size may vary +/- 1/8”. *