Inside Mount Instructions - Width

• Use a steel measuring tape and measure to the nearest 1/8”.
• Measure the exact width (left to right) of the inside top edge of the window frame.
• Take the smallest of the 3 measurements.
• Your window must have a minimum depth of 1 ½" for standard clutch (chain mechanism) and 1 ¾" for a spring roller to allow for the mounting brackets.

Manufacturer Deductions:†

Spring Roller
	1" Metal Roller 14" - 71 7/8"	1 3/8" Metal Roller 73" and greater
Inside Mount
Tip to Tip	1/8"	1/8"
Roller	5/8"	5/8"
Fabric	1 1/8"	1 1/8"

Standard Clutch (Chain Mechanism)
	1" Metal Roller 12" - 71 7/8"	1" Metal Roller 72" and greater
Inside Mount
Tip to Tip	1/8"	1/8"
Roller	1 1/4"	1 3/8"
Fabric	1 1/4"	1 3/8"

* Do not attempt to account for fabric deductions by changing measurements on inside mount shades. *

Inside Mount Instructions - Height

• Measure the exact height (top to bottom) from the top inside edge down to the window sill in 3 places.
• Take the longest of the 3 measurements.
• This is the height measurement you will order; height is always the second measurement recorded.

* Do not transpose width and height measurements. *

* Finished blind size may vary +/- 1/8”. *

Outside Mount Instructions - Width

• Measure the exact width (left to right) of the window frame or how wide you would like the blind to be.
• To go above and beyond the wood frame for panel tracks, add 6” to 8” to your width measurement.
• Make sure to measure wide enough to cover the entire window and provide for minimum light gap. Adding 6” to 8” is recommended. Example: if the window opening is 70", by ordering 76", it will provide 3" coverage on each side of the window.
• This is the width measurement you will order; width is always the first measurement recorded.
• If you specify outside mount, the manufacturer will not take any additional deductions.

Manufacturer Deductions:

Spring Roller
	1" Metal Roller 14" - 71 7/8"	1 3/8" Metal Roller 72" and greater
Outside Mount
Tip to Tip	0"	0"
Roller	1/2"	1/2"
Fabric	1"	1"

Standard Clutch (Chain Mechanism)
	1" Metal Roller 12" - 71 7/8"	1" Metal Roller 72" and greater
Outside Mount
Tip to Tip	0"	0"
Roller	1 1/8"	1 1/4"
Fabric	1 1/8"	1 1/4"

Outside Mount Instructions - Height

• Measure the height you would like the blind to be by measuring top to bottom.
• Make sure to measure wide enough to cover the entire window and provide for minimum light gap. Example: if the window opening is 36", by ordering 40” it will provide 2" coverage on each side of the window.
• This is the width measurement you will order; width is always the first measurement recorded.
• With a decorative hem, be sure to add to your measurement for sufficient overlap of the bottom sill to ensure optimum light control and privacy.

* Do not transpose width and height measurements. *

* Finished blind size may vary +/- 1/8”. *