 |
Hanging
PaperIllusion Wallpaper
|
|
|
Just Tear, Dip, and Apply!
|
It
has never been simpler to create an unusual and fashionable faux finish
for your walls. PaperIllusion™ gives you a unique, torn-paper
look that is as easy as it is elegant. The durable paper is printed
with a marbleized, hand-painted-look design and offered in a range
of colors. And because PaperIllusion™ comes in pre-pasted rolls,
you don't need any messy paints, pricey tools or costly contractors.
You just follow these three straightforward steps:
|
| Preparation: Gathering everything you need
first can save time and hassle later. You will need a container of
water, a smoothing tool, a sponge and a utility knife. |
Step
1: Tear
the PaperIllusion™ randomly into irregular, stone-like shapes.
Tear larger pieces first, approximately 8-by-12 inches, and then tear
smaller pieces as needed.
|
|
Step
2: Start
with straight-edge pieces. These shapes should be used along edges,
ceiling lines, baseboards, doors and windows.
Dip pieces of PaperIllusion™ in water, making sure the entire
pasted side is wet. Allow excess water to drip off into the container. |
|
| Step
3: Apply
the PaperIllusion™ to the wall with the straight edge of the
paper at an edge, the ceiling line, edge of baseboard, door or window.
This prevents excess trimming. Use your smoothing tool to remove excess
water and wipe with a slightly moistened sponge. Place the second
piece with its edges slightly overlapping the first piece approximately
1/4-1/2 inch. |
|
|
Helpful
hints:
Tip
#1
When applying a piece into a corner, gently press your smoothing
tool into the corner and mold the paper to the space.
Tip #2
To complete your project, trim around door frames, windowsills,
light switches and countertops in your room using a utility knife
and the straight edge of the smoothing tool.
For
Selection and Pricing Click Here!
|
|
|
| |
