For your complementary design consultation, call 800-575-8016.

How To Measure Vertical Cellular Shades

Everything you need to correctly measure for vertical cellular shades

Getting Started

Tips before you get started:

  • Use a steel tape measure for the most accurate measurements
  • If you’re considering an Inside Mount, make sure your window has enough depth to accommodate it
  • Always measure width (left to right) first and height (top to bottom) second
  • Record all measurements to the closest 1/8”, making sure to clearly identify which is your height and which is your width—it is very common to get them mixed up

Tools you will need:

  • Steel Measure Tape
  • Step Ladder
  • Pencil/Paper

Determine Inside or Outside Mount

Inside mount vertical cellular shades will hang entirely within the window frame

  • Neat, streamlined look
  • Usually best for energy efficiency

Outside mount vertical cellular shades will hang outside your window opening, overlapping the edges

  • We recommend outside mount for patio doors and sliding doors
  • Minimizes light gaps, giving you better light control and privacy
  • For an outside mount, be sure to allow for the height of the vertical shade's headrail in your measurement

Measuring for Inside Mount

Note: Inside mount shades will have a small deduction automatically applied by the manufacturer, to ensure proper fit.

Width

  • Measure at the depth within the frame where you’ll install your brackets
  • Measure width at the top, center and bottom of your window opening, from edge to edge
  • Record the smallest measurement of the three to the closest 1/8”

Height

  • Measure height at the left, center and right, from top edge to bottom edge
  • Record the largest measurement of the three to the closest 1/8”
measuring diagram for width and height for an inside mount on blinds or shades

Measuring for Outside Mount

Note: Outside mount shades will have no deductions taken at the factory. They will be made according to your exact measurements.

Width

  • Measure the area you want to cover (how far you want the shade to overlap the window opening); we recommend 1 ½” on both sides
  • Record your measurement

Height

  • Determine where you want the top of your shade to be and mark the spot
  • Measure the height from the spot you marked to the top of the window sill. If there is no sill, measure below the window opening to your desired length
  • Record your measurement
measuring diagram for width and height for an outside mount on blinds or shades