Legacy 1 Inch Custom Wrought Iron Drapery Hardware
- This product is custom cut to your specifications
- A variety of finial styles and finishes to choose from
- Normally made in 8 business days
American Blinds Legacy 1 Inch Custom Wrought Iron Drapery Hardware is the perfect finishing touch to anchor your draperies. A wide selection of finial options and finishes are offered. Dramatic and classic, each rod is custom cut to your order. Rods will be shipped in 8-foot sections that screw together with a discreet seam that is covered by a bracket. Each outside mount kit includes the rod, bracket, two finials and mounting hardware. Inside mount kits will not include finials. Add a tieback to secure your drapery to the side of the window when opened. C-rings are needed if you plan to draw your drape across a section of the rod that has a bracket. Rods over 72" will require a center bracket, so if a single drape needs to traverse the rod, C-rings are required. For 2 panels that will meet in the middle, C-rings are required for rods over 144".
Note that the finials you choose will add length to the overall size of the rod. Finial choices and width of each finial:
Acorn: 3 1/2"
Capri: 3 1/2"
Square Cap: 2 1/4"
End Cap: 7/8"
Fleur: 4 1/2"
Iron Ball: 3-1/2"
Small Acanthus: 4 1/2"
Swirl: 6 5/8"
Torche: 5 1/2"
Installation Time: 15-20 minutes
Child Safety: This product does not have accessible cords and is considered to be safer for homes where children and pets may be present.
- Materials and operating mechanisms (including cords and ladders) are covered for 3 years.
- Manufacturer defects and shipping damage (reported within 14 calendar days)
- Variations in texture, construction or color of natural products, slight warping of wood products, and natural color changes to materials that take place over time.
- Product failure due to any of the following:
- Improper installation, operation or cleaning
- Normal wear and tear
- Excessive exposure to heat, sunlight or moisture
- Damage from children, pets or insects
- Alteration of any kind
- Products that exceed size recommendations or are outside of product specifications
Standard Blind Specifications
- Minimum Width: 12"
- Maximum Width: 94"
- Inside Mount Deduction: 1/4" Total
- Rods over 96" will be split into two
- Inside Mount will not include finials
- Projection from wall: 2"
- Inner Diameter Eyelet - 1.5"
- Outer dimension of Eyelet - 2.25"
- C-Ring Opening - 13/16th
Mounting Requirements
- Brackets Included Up to 72" Wide: 2
- Brackets Included Up to 144" Wide: 3
- Brackets Included Up to 216" Wide: 4
- Brackets Included Up to 264" Wide: 5
- Brackets Included Up to 336" Wide: 6
Standard Options
- Single or Double Rod
- Eyelet Rings (10 per bag)
- C-Rings (10 per bag)
- Orbed tiebacks
Quick Links
Origin of Production
- Made in the USA