Legacy Classic Pleat Drapery
- These drapes feature a traditional pinch-pleat design and are easily attached to a rod with hooks
- With so many fabrics, you can find the perfect look for any room
- Normally made in 7 business days
$100.09Ashton Stripe Linen SW102 
$100.09Ashton Stripe Rice SW203 
$100.09Ashton Stripe Greysmoke SW101 
$100.09Ashton Stripe Navy SW103 
$100.09Aurora Arctica SW107 
$100.09Aurora Moonstruck SW108 
$100.09Braidy Salt SW112 
$100.09Braidy Ash SW110 
$100.09Braidy Husk SW111 
$100.09Dahlia Grain SW210 
$100.09Dahlia Stone SW212 
$100.09Dahlia Ruby SW211 
$100.09Helena Birch SW136 
$100.09Helena Cove SW137 
$100.09Helena Espresso SW138 
$100.09Jasper Facets SW239 
$100.09Jasper Summit SW243 
$100.09Jasper Monolith SW241 
$100.09Jasper Icy Blue SW240 
$100.09Jasper Coal SW238
American Blinds Easy Classic Pleat Draperies take the soft elegance of fabric, embellish them with a pinch pleat and create a “wow” factor within your room. These drapery panels offer a choice of rich jewel tones, sophisticated brights and soft, soothing neutrals, and are available as refined patterns, bold prints and eye-catching solids.
Easy Classic Pleat Draperies are distinguished by pinch pleats at the top of the panel, which easily attach to either a standard drapery rod with the assistance of hooks or to eyelet rings with the aid of decorative hardware.
Fabric Content
For a full list of materials for this product, click here.
Install Time: 30 - 35 Minutes
We Recommend:
Light filtering liners allow light to gently filter through the drapery. Room -darkening liners obstruct 95% of outside light, whereas blackout liners obstruct 100%. Note: Light-filtering fabrics will reveal silhouettes to the outdoors at night.
Panel-height dimension reflects the height of the finished product, including the pleat. Finished drapery length is recommended to be 1/2” off the floor.
Consider your view outside when selecting how you’d like your draperies to open. If you want two panels that split in the middle and stack to the sides evenly, choose split panel when customizing your product. Choose single panel if you want one panel that stacks all to one side.
For added variety and dimension, you can match these drapery panels with our Classic Roman Shades or add optional traversing drapery hardware.
Considerations:
Lining is strongly recommended to protect your draperies from sun and heat damage. In the case of silk and linen draperies, it is a must.
These draperies will come with built in pleats that will create gentle folds below when mounted to the rod, so simply order the exact width you want to cover.
When ordering the decorative rod upgrade, a 3 1/8" ball finial will come for each end of the rod. The finial width is not included in the width ordered.
- The length of clip rings is included in the height measurement. Clip rings measure 2 ¾”.
Coordinating Products:
- Click here to see other products that are available in many of the same materials.
Child Safety Information
This product does not have accessible cords, and therefore is safer for places where children or pets may be present.
Warranty:
With the assurance of the Blinds.com Warranty, you can trust that this product will last and provide added value and beauty to your home.
- Materials and operating mechanisms (including cords and ladders) are covered for 3 years.
- Manufacturer defects and shipping damage (reported within 14 calendar days)
- Variations in texture, construction or color of natural products, slight warping of wood products, and natural color changes to materials that take place over time.
- Product failure due to any of the following:
- Improper installation, operation or cleaning
- Normal wear and tear
- Excessive exposure to heat, sunlight or moisture
- Damage from children, pets or insects
- Alteration of any kind
- Products that exceed size recommendations or are outside of product specifications
Standard Blind Specifications:
- Available Panel Widths: from 24" up to 192" (note: this is the coverage width - meaning how much space the panel covers, not the width of your window)
- Available Panel Height: 24" up to 108" (Note: the panel height is from the top of the fabric to the bottom of the fabric - we suggest measuring 1/2" from the floor)
Made with 200% Fullness
The length of clip rings is included in the height measurement. Clip rings measure 2 ¾”.
Mounting Requirements:
- Outside Mount Only: panels are available as outside mount, meaning they are installed above and around the window casing. Ideally, you would have 8” of wall space above and on each side of the window.
Optional Upgrades:
- Single Panel or Split Panel
- Light Filtering and Blackout Liners
- Traverse Rods Available
Origin of Production
- Imported