NOT CURRENTLY AVAILABLE
Bella View Legacy 1 Inch Custom Wrought Iron Drapery Hardware
Choose Your Color or Order Free Swatches
Bella View Legacy 1" Custom Wrought Iron Drapery Hardware is the perfect finishing touch to anchor your draperies. A wide selection of finial options and finishes are offered. Dramatic and classic, each rod is custom cut to your order. Rods will be shipped in 8-foot sections that screw together with a discreet seam that is covered by a bracket. Each outside mount kit includes the rod, bracket, two finials and mounting hardware. Inside mount kits will not include finials. Add a tieback to secure your drapery to the side of the window when opened. C-rings are needed if you plan to draw your drape across a section of the rod that has a bracket. Rods over 72" will require a center bracket, so if a single drape needs to traverse the rod, C-rings are required. For 2 panels that will meet in the middle, C-rings are required for rods over 144".
Note that the finials you choose will add length to the overall size of the rod. Finial choices and width of each finial:
Acorn: 3 1/2"
Capri: 3 1/2"
Square Cap: 2 1/4"
End Cap: 7/8"
Fleur: 4 1/2"
Iron Ball: 3-1/2"
Small Acanthus: 4 1/2"
Swirl: 6 5/8"
Torche: 5 1/2"
Installation Time: 15-20 minutes
Child Safety: This product does not have accessible cords and is considered to be safer for homes where children and pets may be present.
Standard Blind Specifications
- Minimum Width: 12"
- Maximum Width: 94"
- Inside Mount Deduction: 1/4" Total
- Rods over 96" will be split into two
- Inside Mount will not include finials
- Projection from wall: 2"
- Inner Diameter Eyelet - 1.5"
- Outer dimension of Eyelet - 2.25"
- C-Ring Opening - 13/16th
- Made In: Made in the USA
- Brackets Included Up to 72" Wide: 2
- Brackets Included Up to 144" Wide: 3
- Brackets Included Up to 216" Wide: 4
- Brackets Included Up to 264" Wide: 5
- Brackets Included Up to 336" Wide: 6
- Single or Double Rod
- Eyelet Rings (10 per bag)
- C-Rings (10 per bag)
- Orbed tiebacks