How to Clean Blinds
Keep your window coverings looking fresh and working properly for years to come! Check out our helpful tips on how to clean and care for blinds, shades, shutters and draperies.
Blinds Care Frequently Asked Questions
- How do I clean fabric products?
- Do you have any helpful hints for cleaning my non-fabric blinds?
- How do I keep cellular or pleated shades clean?
- How do I dust my fabric top treatments, curtains or draperies?
- How do I care for my wood blinds?
- What is the easiest way to clean a routless wood or faux wood blind?
How do I clean fabric products?
Use a hair dryer on a cool setting to remove dirt and dust from the product’s interior. Lightly vacuum with a brush attachment.
Do you have any helpful hints for cleaning my non-fabric blinds?
For wood, faux wood, mini and PVC blinds, we recommend you use dryer sheets to reduce static cling and help repel dust. For a deeper cleaning, wear an old pair of fabric gloves and run your fingers along the slats. You may also dip the gloved finger in warm, slightly soapy water and run your fingers along the slats. Never place water on wood blinds.
How do I keep cellular or pleated shades clean?
Vacuum regularly with a brush attachment. Spot clean with warm water and a mild soap detergent.
How do I dust my fabric top treatments, curtains or draperies?
Follow the manufacturer’s recommendations for care and cleaning. If machine washable, carefully remove the treatment and put it in the dryer on the air cycle for several minutes. For added freshness, add a dryer sheet!
How do I care for my wood blinds?
Regular dusting or light vacuuming with a brush attachment. We recommend you do not use water on wood blinds, as it may damage the surface or contribute to warping.
What is the easiest way to clean a routless wood or faux wood blind?
When the routless feature is ordered with any 2” or 2 1/2” wood or faux wood blind, the slats easily slide out so they can be thoroughly wiped. Begin removing and cleaning from the top, one slat at a time. Replace each slat in its original position as you go along.
General Tips on How to Clean Blinds
Just about any blind or shade will benefit from dusting. The surface of the slats of mini blinds, wood blinds, and the vanes of vinyl and aluminum vertical blinds in particular are quite smooth, and dust will easily brush off if you dust regularly. Tilt slats first up, then down (but not entirely closed) to reach the entire top and bottom surfaces. We recommend that you use an ordinary soft dusting cloth, although feather dusters also work quite well, especially on fabric shades.
Check out our Easy Clean Duster for a simple, effective solution!
Use the brush dust head attachment for your vacuum for a more thorough cleaning. If cleaning a mini or wood blind, tilt slats as described above. This is the preferred method for cleaning fabric shades.
Compressed air or hair dryer
Blow dust off of your blind or shade. This is particularly helpful with cellular shades, in order to clean out any particles that may collect within the cells. If using a hair dryer, be sure to set it on the lowest heat setting possible
Use a damp cloth or sponge and mild detergent mixed with warm water, and make sure to protect your floor or windowsill from excess water. Tilt and wipe the slats of your blind clean. Many stores carry cleaner meant specifically for aluminum blinds.
You can also take your PVC or aluminum blind down, place it in a tub of mild soapy water, and soak for 5 minutes while gently moving the water with your fingers. Rinse it clean, then make sure the slats are closed before removing from water. You may wish to wipe it dry before reinstalling. Make sure you do this when you can allow your blind to dry completely in the open air.
Faux wood blinds can be cleaned with a damp sponge as described above, but they will probably be too heavy to easily be taken down and immersed in water. Actual wood blinds should never be cleaned with water. Instead, use a lemon oil or wood treatment.
Cellular and pleated shades
Use a damp cloth or sponge and mild detergent mixed with warm water. Blot gently and be sure the shade is left to dry in its fully lowered position. Be careful not to apply too much pressure as small balls of lint may form upon the surface of the shade. Some cellular shades can also be bathtub cleaned as above. Be sure to check the instructions that come with your specific blind.
For vinyl vanes, use a damp cloth or sponge and mild detergent mixed with warm water. For fabric vanes, use a dry fabric cleaner.
Other blinds and shades
Some blinds and shades can be spot-cleaned with mild detergent, but it varies by brand name and product because of the difference in materials used. We recommend you check your documentation.
While you’ll only need to do this occasionally (we recommend every 3 to 5 years), ultrasonic cleaning will get your blinds beautifully clean. Do not use on wood blinds or metallized-backed shades.